3d Printer by Muhammad AunsAntenna by Ben AveryBathroom by Sahab UddinBathtub by Sahab UddinBillard and ball by Pascal HeßBookcase by Gia HaiBookcase by lastsparkBookshelf by Sahab UddinBroken window by RonoirBulb by AdiyogiBulb by Vectors MarketBurning Down The House by Matt CardinalButtons by Atif ArshadButtons by Line Icons ProCar by DinosoftLabCat by Martin LEBRETONCeiling Bulbs by…
Tap the Menu button, that looks like: Tap Mezzo. Tap Reset. You now have 7 options: Default General Options – This will remove all Mezzo settings from the app and Mezzo. This does not affect devices, users etc. Default Users & Keys – Which will remove all the users connected from the app and Mezzo.…
To complete the firmware upgrade you will need; Computer Phillips Head Screw driver Paper clip USB Micro Cable Mezzo battery key The latest Mezzo firmware file 1. Manually Update the firmware on Mezzo You’ll need a screw driver to remove the back panel and a paper clip to push the reset button: 1.1 Download the latest…
Once you’ve set up your Google Home to link to Mezzo (if you haven’t already done so, follow the steps in this post), here are some phrases you can use: “OK Google” Turn <Device> On/Off eg. “Turn Kettle On” or “Turn Kitchen on” Dim your Lights Set <Device> to <Brightness>% eg. “Set my Bedside…
Did you know that you can use Google Home and Alexa to change the colour of your RGB Devices? The colours you can request of Google Home and Alexa go far beyond blue, green, yellow, and red. Below is a list of colours in their colour groups, or click here to see the full list.
Did you know that you can use Google Home and Alexa to change the colour of your RGB Devices? The colours you can request of Google Home and Alexa go far beyond blue, green, yellow, and red. Below is a comprehensive list of colours available, or click here to see the colours in colour groups.
If, while adding a device, an error occurs, please do the following: 1. Go to ‘My Automation’ 2. Pull to refresh the page. 3. A sync should occur and you will be able to see the device that you tried to add as a “Z-Wave Device_0X”. 4. Press and hold the device and press “edit”.…
To reset Mezzo’s Z-Wave system to factory default settings, you must factory reset the entire Hub. You can factory reset Mezzo with steps found below. NOTE: Resetting Mezzo will restore all factory settings. All device connections, automation, scenes, configurations, and users associated with that Mezzo will be lost in the reset. All devices connected to…
Almost all Z-Wave plus devices must now support Association group one as a ‘lifeline’ Group which reports status to the hub. For example, Battery operated devices are now supposed to report their battery status via the lifeline group.
Use this process to connect Z-Wave devices to Mezzo. Note: In order to include a Z-Wave device, you must have the physical device with you, turned on and plugged in, and be within range of the Mezzo. Within the Mezzo mobile app, follow these steps to connect or include a new device: Tap my Automation.…
